BS IS0 7661:2024 BSl Standards Publication Aerospace fluid systems Clamp blocks for tube lines having axial alignment Design requirements and qualification testing (metric series) bsi. BRITISH STANDARD BS ISO 7661:2024 National foreword This British Standard is the UK implementation of IS0 7661:2024. It supersedes BS M 62:1987, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ACE/69, Aerospace hydraulic systems, fluids and components. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BsI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 2024 Published by BSI Standards Limited 2024 ISBN9780539160369 ICS 49.080 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2024. Amendments/corrigenda issued since publication Date Text affected BS IS0 7661:2024 International ISO Standard IS07661 Aerospace fluid systems - Second edition 2024-10 Clamp blocks for tube lines having axial alignment Design requirements and qualification testing (metric series) Systemes de fluides pour I'aeronautique et I'espace - Peignes supports de tuyauteries a alignement axial - Exigences de conception et essais de qualification (série métrique) Reference number ISO 7661:2024(en) @ISO 2024